PrusaSlicer (Slic3r Prusa Edition) ini für Octoprint

➦ 3D - Druck ➨ Cura Slicer Ini für Octoprint

Anhand des folgenden Formulars kann auf dieser Seite ein Slic3r-Profil für die Version 1.33.8 erzeugt werden.

Das Formular ist aktuell noch in der Testphase und wird für einen Geeetech Prusa i3 Pro B mit einem 0,4mm Düsendurchmesser verwendet:

Material:

PLA PLA CoolingFan PETG

Layer

015 L02 L025
Glass Tape (0,2 offset)

Solid

20% solid

Fill

fill_stars fill_honeycomb fill_cubic

Brim

no_brim brim 5 brim 10 brim 20

Speed

fast medium slow

Dateiname

Create file

Filament Settings:

bed_temperature

bridge_fan_speed

cooling

disable_fan_first_layers

extrusion_multiplier

fan_always_on

fan_below_layer_time

filament_density

filament_diameter

filament_max_volumetric_speed

first_layer_bed_temperature

first_layer_temperature

max_fan_speed

min_fan_speed

min_print_speed

slowdown_below_layer_time

temperature

Print Settings:

avoid_crossing_perimeters

bottom_solid_layers

bridge_acceleration

bridge_flow_ratio

bridge_speed

brim_width

clip_multipart_objects

complete_objects

skirt_line_count

default_acceleration

dont_support_bridges

ensure_vertical_shell_thickness

external_fill_pattern

external_perimeter_extrusion_width

external_perimeter_speed

external_perimeters_first

extra_perimeters

extruder_clearance_height

extruder_clearance_radius

extrusion_width

fill_angle

fill_density

fill_pattern

first_layer_acceleration

first_layer_extrusion_width

first_layer_height

first_layer_speed

gap_fill_speed

infill_acceleration

infill_every_layers

infill_extruder

infill_extrusion_width

infill_first

infill_only_where_needed

infill_overlap

infill_speed

interface_shells

layer_height

max_print_speed

max_volumetric_extrusion_rate_slope_negative

max_volumetric_extrusion_rate_slope_positive

max_volumetric_speed

min_skirt_length

only_retract_when_crossing_perimeters

ooze_prevention

overhangs

perimeter_acceleration

perimeter_extruder

perimeter_extrusion_width

perimeter_speed

perimeters

raft_layers

resolution

seam_position

skirt_distance

skirt_height

skirts

small_perimeter_speed

solid_infill_below_area

solid_infill_every_layers

solid_infill_extruder

solid_infill_extrusion_width

solid_infill_speed

spiral_vase

support_material

support_material_angle

support_material_buildplate_only

support_material_contact_distance

support_material_enforce_layers

support_material_extruder

support_material_extrusion_width

support_material_interface_contact_loops

support_material_interface_extruder

support_material_interface_layers

support_material_interface_spacing

support_material_interface_speed

support_material_pattern

support_material_spacing

support_material_speed

support_material_synchronize_layers

support_material_threshold

support_material_with_sheath

support_material_xy_spacing

thin_walls

threads

top_infill_extrusion_width

top_solid_infill_speed

top_solid_layers

travel_speed

xy_size_compensation

Printer Settings:

max_layer_height

min_layer_height

nozzle_diameter

retract_before_travel

retract_layer_change

retract_length

retract_length_toolchange

retract_lift

retract_lift_above

retract_lift_below

retract_restart_extra

retract_restart_extra_toolchange

retract_speed

use_firmware_retraction

use_relative_e_distances

use_volumetric_e

variable_layer_height

wipe

z_offset

autocenter

^{({{pro_count}})}

Beitrag bewerten:
{{percentage}} % positiv

^{({{con_count}})}

DANKE für deine Bewertung!

➨ PrusaSlicer (Slic3r Prusa Edition) Octoprint | ➦ 3D - Druck | Cura Slicer Ini für Octoprint ➨

Fragen / Kommentare

(sortiert nach Bewertung / Datum) [alle Kommentare(am besten bewertete zuerst)]

✍anonym

17.05.2018 14:36

User: Martin 
Hallo!
Tolle idee. Bei Cura funktioniert es, aber hier (slic3r) bekomme ich keine Datei.??
Grüße
Martin

↳

✍Bernhard

gepostet am 17.05.2018 14:36

ja stimmt, sorry da hat sich bei der letzten Änderung ein Fehler eingeschlichen: funktioniert jetzt wieder ...

Beitrag erstellt von Bernhard